|
| |
| 1.
Trim |
| |
Chrome, P. Brass, Gold (real 24k gold),
contact us for availability on
Satin or Brushed Nickel. Laurel Mountain offers 16 color coordinated trims
(the 16 colors are all that are available to them) - The list is subject to
change to please contact us
regarding current available colors. If the trim color is not listed, they
can not get the color, and a metal trim finish will have to be purchased.
The list of 16 colors do not apply to the Hydro-Back system or the Hydro-Air
Massage system options. |
| 2.
Fashion colors |
| |
Any solid color of acrylic that is not a standard color
requires an up-charge to be created. The list of standard colors is subject
to change so please contact us
for current details. Any color not listed on the price guide will require
some additional charge. We can provide any color of acrylic manufactured,
whether it is on our list or not. |
| 3.
Marble color |
| |
Manufactured Marble acrylic colors are also available. There
is an additional lead time and we will need to contact the factory to check
availability of the color of marble. |
| 4.
Waste and Overflow |
| |
Laurel Mountain offers a cable operated waste & overflow for
your convenience. |
| 5.
Integral Tile Flange |
| |
This option is only available on models that have it listed
as an option. Laurel Mountain will mold a tile flange on three sides for an
alcove installation (this is molded when the tub shell is made - it is not
attached later). When ordering this option, right hand or left hand will
have to be specified on end drain models. For center drain models, overflow
side or opposite overflow side will have to be specified for proper molding. |
| 6.
Solo-Touch |
| |
On/Off control with 20 minute timer, low water shut off, and
variable speed motor. The pump operates with the touch of the logo - First
function -Touch the logo once and the motor comes on high, Second function -
Touch and hold the logo and the speed of the motor will change - just
release your touch when the desired speed is achieved, Third function -
Touch and hold the logo until the slowest speed is reached and then release
the logo (The massage mode will operate by speeding up and slowing down).
This option is only available on 6 jet systems. The Solo-Touch can not be
purchased with the Lumbar Jet Package. |
| 7.
Mountain air switch |
| |
On/Off control with a 20 minute timer and low water shut
off. This on/off control operates with the standard air switch. |
| 8.
Heater |
| |
Factory installed, in-line electric T-heater with internal
pressure switch. When the pump is running with water in the whirlpool, the
pressure switch is activated to turn the heater on. When the pump is off,
the heater turns off. Separate 20Amp dedicated GFCI 110v circuit is needed
for the heater. |
| 9.
Mood Light |
| |
Comes with a interchangeable color lens kit (red, blue
green, yellow, orange). The mood light can be ordered with a factory
supplied on/off air switch that is mounted on the deck or the
homeowner/installer can supply a wall switch. Please ask about the switch
when placing your order. |
| 10.
Rotary Jet Option |
| |
Two insert cartridges that spin to provide a circling
massage. They can be interchanged with any of the standard Colony jet
cartridges. Only two Rotary inserts can be used on a six jet system. Note:
two rotary inserts are included in the Lumbar Jet Package |
| 11.
Attachable Tile Flange |
| |
Plastic tiling flange that is installed by the installer.
The flange is supplied in a roll that will accommodate three sides of the
tub. The plastic flange will hook up under the tub down flange and come up
high enough to be covered by drywall and tile. |
| 12.
Spray coat |
| |
Spray coat is a protective coating that is sprayed on at the
factory to protect the tub surface during installation procedures (dry
walling, tiling, etc.). The coating is then peeled off after the chance for
surface damage has passed. |
| 13.
Alternate Pump |
| |
Alternate pump locations are shown under each model in the
detail specification sheet for each model. If an alternate pump location is
not listed, the pump will automatically come in the standard location. |
| 14.
Extra Pillow |
| |
Every model except the corner models come with 1 or 2
pillows standard. Refer to the model pictures for pillow quantity. All of
our pillows are now the same size(14 inches wide). The pictured pillows on
the Delmont, Halifax, York, and Bedford are no longer available. EX: The
pillows that will come on those units will be the same pillow that is
pictured on the Mercer models. |
| 15.
2 ½ Horsepower Upgrade |
| |
An optional larger pump is available. Note: A 2 ½ HP pump is
included and part of the Lumbar Jet Package |
| 16.
Lumbar Jet Package |
| |
This option adds 2 lumbar jets to the jet system (8 jets
total), increases the pump horsepower to 2 ½ HP and includes 2 rotary
massage inserts. This is a package deal. You may also order 2 Lumbar Jet
Packages if desired on the same unit. |
| 17.
Neck Massage
|
| |
Click for individual sheet.
|
| 18.
Hydro Back Massage |
| |
Click for individual sheet.
|
| 19.
Hydro Bubble System |
| |
Click for individual sheet.
|
| 20.
Attachable Skirt |
| |
An optional acrylic skirt can be added on most rectangle and
corner models. All attachable skirts are attached at the Laurel Mountain
factory for your installation convenience. Laurel Mountain removable panels
are attached with fiberglass panel clips that will not fall off, made out of
acrylic, and backed with fiberglass and resin for quality purposes. Please
contact us regarding this
option to see if one is available on a certain model. An extra charge is
added for fashion, bold, marble, granite, or pearl colors. |
| 21.
Two Horsepower Motor |
|
